Description of lights Fenix ​​HM50R V2.0 (XP-G S4, ANSI 700 lm):

Fenix ​​HM50R V2 flashlight model. 0 is a rechargeable multi-functional headband. It will benefit you during active leisure and travel activities, such as when you go camping, hiking, or work in low-light conditions. Power comes from a rechargeable 16340 Li-ion battery, and this battery is included in the kit. The highest luminous flux is 700 lumens, and the range of the beam is 115 meters. The flashlight uses a diode from the famous company Cree XP-G3 S4, the lighting is white. The service life of such a diode is 50 thousand hours. In addition to white lighting, a red light is also provided.

The removable design of the forehead protector makes it possible to use it also as a manual version. A USB Type-C port is provided for quick and easy charging. If you want to avoid accidentally turning on the model, then for this purpose you can resort to blocking.

Below are details about the features and functions of the headlamp.

Lantern control

To turn on the model: press and hold the button for half a second to activate the white light mode. If you need to switch to red light mode, press the button twice with the headband off. To turn it off: with the device turned on, press and hold the button for literally half a second.

To activate the white light mode, press the button once and it will switch between the minimum→medium→maximum→Turbo modes. At the same time, the lantern has a function of memorizing the selected mode. To enter the red light mode, press the switch once, it will switch between levels red→red flashes. In this case, modes are not memorized.

To lock the flashlight: When off, press and hold the button for three seconds before the model will glow white. It then flashes red four times to indicate that the lock is on.

To unlock, you need to press the switch for three seconds, after which the red light will flash four times, and the model will enter the red lighting mode.

Mode

White lighting

• Turbo brightness in this case is maximum, 700 lumens. The duration of work is one hour. The range of the beam is 115 meters, and the intensity of the flow is 3350 candelas.
• Maximum. At this level, the brightness of the light is 400 lumens. The duration of work is three hours. The distance of the beam is 86 meters. The lighting intensity reaches 1849 candelas.
• Average. The brightness is equal to 130 lumens, the glow time is eight hours. The range of the beam is 49 meters. The intensity of the luminous flux is equal to 596 candelas.
• Minimum. The luminous flux reaches 30 lumens, the working time is 42 hours. The distance of the beam is 23 meters. Lighting intensity - 128 candelas.

Red light

• In the "red" mode, the lantern provides five lumens of brightness, works in this mode for 60 hours, and the range of the beam is six meters. Intensity is 9 candelas.
• "Red flashes": in this mode, respectively, five lumens of brightness, 120 hours of operation, six meters of beam range, and the intensity is nine candelas.

* It should be emphasized that the given glow parameters were obtained during experiments in the laboratory. Where there were the following conditions: an ARB-L16 - 700P Li-ion battery was used, the air temperature reached about 21 +- 3 degrees Celsius, and the humidity was 50-80 percent. If the conditions of the external environment, as well as the used battery, will be different, then the performance indicators will also change.

The lamp has good protection against overheating of the housing. When working, any lantern accumulates a lot of heat. So that this does not interfere with the normal functioning of the model, an option to reduce the brightness has been provided. When the temperature is 60 degrees or higher, the brightness of the light will automatically decrease slightly. When the temperature drops below 60 degrees, you can return to a more powerful mode.

Charge level indicator: when the flashlight is off, press the button, the indicator will turn on for three seconds. If the green light is on, the charge is 80-100%. If it flashes green, then 50-80%. If the red light comes on, then 20-50% of the charge remains. And when it flashes red, it means that the charge remains 0-20%, and you need to charge the battery.

The lantern is made of strong aluminum a6061-T6. There is high-quality anodization that protects the model from abrasive influences. The dimensions are 64*36*32 millimeters. Weight is 78 grams, including battery and headband. Reliable protection against moisture, dust, damage and scratches of the case is provided.

Feature:

• headrest for tourism, active leisure;
• the maximum illumination brightness reaches 700 lumens;
• the distance of the beam is 115 meters;
• power from battery 16340;
• Cree XP-G3 S4 diode is used for illumination;
• lighting: white, red;
• six brightness levels;
• charged using USB Type-C;
• the lantern can be blocked;
• can be used as a manual model;
• controlled by a button;
• low voltage alert function;
• protected against overheating of the case;
• indication of the battery charge level;
• can withstand a fall from a height of two meters;
• dust and moisture protection standard: IP68;
• material: strong aluminum a6061-T6;
• the surface is treated with high-quality anodization;
• dimensions: 64*36*32 millimeters;
• weight is 78 grams, including battery and headband.

Complete: 

Fenix ​​HM50R V2.0 flashlight, ARB-L16-700P lithium-ion battery, USB Type-C charging cable, spare ring, user manual, warranty card.

Warranty:

This lantern is provided by the company for 5 years.