Fenix ​​HT32 Hand Torch Description:

The Fenix ​​HT32 can be used as a hand torch or mounted on a weapon using one of the proprietary mounts: ALG-00, ALG-06, ALG-16 or ALG-18. Simplified control is provided by the AER-05 remote button (all additional accessories are purchased separately).

The model is capable of generating a light flux of three shades:

• white light (Luminus SFT70) with a color temperature of 6500K;
• red light (Luminus SFT20 RA);
• green light (Luminus SFT20 CG).

The brightness of white lighting can reach 2500 lumens at Turbo power. The limiting brightness of the red and green rays is 400 lumens and 1400 lumens, respectively.

The lantern has a proprietary TIR lens, manufactured using patented technology. The diameter of the lens has been reduced by 30% compared to the models of previous years of release, while the range of the white light beam has increased by 100%, reaching 640 meters. The range of colored lighting is 120 meters for red and 210 meters for green flow.

Working modes

9 modes are divided into groups depending on the shade of lighting. In addition to modes with constant lighting, the user has access to a flashing strobe, the brightness of which reaches the maximum possible mark of 2,500 lumens.

A group of modes with white light

• Turbo: 2,500 lm - 101,000 cd - 640 m - 1 h 50 min;
• High: 1000 lm – 43 200 cd – 420 m – 2 h 30 min;
• Medium: 350 lm – 15000 cd – 250 m – 8 h;
• Low: 50 lm – 2300 cd – 100 m – 29 h;
• Stroboscope: 2500 lm.

Group of modes with red light

• High: 400 lm – 3120 cd – 120 m – 3 h 15 min;
• Low: 150 lm – 1100 cd - 70 m - 4 h 50 min.

Group of modes with green light

• High: 1400 lm - 11000 cd - 210 m - 2 h 30 min;
• Low: 350 lm - 2500 cd - 100 m - 6 h.

The calculation of the glow time in the Turbo mode is carried out in the sum of the duration of operation in other modes, which are turned on in the event of heating of the internal electronics and activation of the internal protection against overheating.

Control features

The HT32 flashlight has a tactical type of control with two switches located in the tail of the housing.

The large round button is programmed to instantly activate the light when half pressed. A full press fixes the constant lighting mode.

The oval (function) button has several functions:

• Switching a group of modes by pinching and holding;
• Brightness change by a short press.

Power source

Despite the high performance of the flashlight, only one 21700 Li-ion battery is enough to power it. This is the branded ARB-L21-5000U included in the kit. The working voltage of the lantern is in the range of 3.0 - 4.2 V.

Among the advantages of the battery: immunity to the "memory effect" and increased capacity, which extends the working time of the model up to 29 hours on one charge. The battery is charged via the USB Type-C port built into the power supply. The charging cable is included in the package.

Physical parameters

Fenix ​​HT32 has been designed with field conditions in mind, where it is impossible to avoid contact with dirt and moisture, so the lamp body boasts the highest IP68 waterproof class. This means that if the device falls into water, sand, or other unstable ground, neither moisture, nor grains of sand, nor fine dust will get inside the case.

The impact resistance of 1 meter excludes the possibility of the model malfunctioning if it accidentally fell out of your hand or bag during transportation. Case material — aluminum A6061-T6 with a hard anodized HAIII coating, which protects the metal from corrosion.

The dimensions of the lantern are 160 x 52 x 25.4 mm. The model weighs 185 grams without the battery.

Package

Fenix ​​HT32 flashlight, ARB-L21-5000U li-ion battery, USB Type-C charging cable, spare sealing ring, lanyard, case, manual, warranty card.

Features:

• handheld flashlight for hunting and active recreation;
• color - black;
• number of LEDs - 3;
• type of LEDs - white Luminus SFT70, red Luminus SFT20 RA, green Luminus SFT20 CG;
• color temperature of white light - 6500K;
• max brightness of white light - 2500 lumens;
• max brightness of red light – 400 lumens;
• max brightness of green light – 1400 lumens;
• light range – 640 meters (white), 120 meters (red), 210 meters (green);
• number of modes – 9;
• working time – up to 29 hours;
• control type – 2 tail switches;
• power source – 1 x 21,700 (li-ion);
• working voltage – 3.0 - 4.2 V;
• battery included in the kit is charged via the built-in USB Type-C port;
• body material – aluminum A6061-T6 with anodized;
• tightness – IP68;
• impact resistance – 1 meter;
• dimensions – 160 x 52 x 25.4 mm;
• weight – 185 g (without battery).