Fenix ​​TK20R V2 flashlight description. 0:

Rechargeable Fenix ​​TK20R V2 multi-purpose model. 0 is characterized as a tactical flashlight. This is a hand-held format device that provides stunning lighting brightness of up to 3000 lumens. The range of the beam reaches 475 meters. Management is easy and fast, for this there are double tactical buttons in the tail part. Strong and solid body.

A lithium-ion battery with a capacity of 5000 mAh is used for power, it is presented in the set. The flashlight is charged via the USB Type-C port. It is an excellent assistant in situations where intensive and long-term operations need to be carried out. The Luminus SFT70 diode with a service life of 50,000 hours is used.

Features of the lantern:

• improved system of frequency-pulse transmission (APF);
• constant lighting due to the presence of an internal structure with a double spring - reliability is ensured even with a strong impact;
• instant activation and activation of the "Strobe" mode - with the participation of double tactical buttons.

Below is detailed information about the functions and operation of the model.

Lantern control

Fenix ​​TK20R V2.0 is controlled using round and oval switches. The round button is intended for instant activation of the flashlight. The oval button is needed to toggle the brightness and access the Strobe mode.

To turn on the flashlight: press the tactical switch, the light will turn on, if you let go, it will turn off. If you fully press the button, you can turn on the light for a longer time. In order to turn off the lighting, it is necessary to press the same switch again.

To select the lighting mode: from the on state, you need to press the oval switch, as a result, you will move between Eco→Low→Med→High→Turbo levels. To activate the "Stroboscope" mode: it follows from the enabled state of the model to press and hold the oval switch for half a second. After clicking, you can return to the general group of modes.

From the off state, press and hold the oval button, thereby you will be able to start the "Stroboscope" mode. Release the switch to leave the specified mode.

The model has an option to memorize brightness modes. Upon reactivation, the level that was applied before the exclusion is started.

Model operating modes

• Turbo. The largest luminous flux, which is 3000 lumens. Duration of work - 2 hours 50 minutes. Lighting intensity is 56,600 candelas. The range of the beam is 475 meters.
• High. The luminous flux reaches 1000 lumens, the duration of work is 3 hours and 10 minutes. Lighting intensity - 17620 candelas. The distance of the beam reaches 265 meters.
• Med. Light brightness - 350 lumens, duration of work - seven hours, lighting intensity is 5860 candelas. Beam distance - 150 meters.
• Low. The brightness of the light flux is equal to 150 lumens. The duration of the glow is 21 hours and 20 minutes. The intensity of the flow is equal to 2500 candelas. The range of the beam is 100 meters.
• Eco. The luminous flux reaches 30 lumens. The glow time is 48 hours. The intensity of the luminous flux is 490 candelas. Beam distance - 45 meters.
• Strobe. The brightness reaches 3000 lumens.

* The model has an option of intelligent protection against overheating of the case. If you use the flashlight at maximum settings for a long time, it will overheat. Overheating can damage the model. When the temperature reaches 60 degrees or more, the brightness will automatically decrease to cool down the lantern body. When the temperature is reduced to 60 degrees or less, it becomes possible to return to high brightness modes again.

Battery level indicator

Each time the flashlight is activated, the indicator shows the battery status for three seconds.

If the green light is on, it means that the charge is 100%-85%. Blinking green light-charge remains 85%-50%. Red light: Charge level reduced to 50% -25%. If the red light flashes, it is obvious that there is very little charge left, only 25%-1%. The battery needs to be charged.

There is also a low voltage alert option.

Physical parameters of the model

The dimensions of the lantern are 152*34*25.4 millimeters. Weighs 204 grams (including the weight of the battery). The body is made of durable material - aluminum A6061-T6. A special premium anodization is provided, which protects against the appearance of scratches on the coating of the case. Withstands a drop from a height of 1 meter. The standard of protection against dust and moisture is IP68.

Characteristics:

• tactical lantern for tourism and active recreation;
• the model has a multi-purpose purpose;
• the maximum brightness of lighting reaches 3000 lumens;
• the maximum beam distance is 475 meters;
• controlled by two switches;
• a lithium-ion battery with a capacity of 5000 mAh is used for power;
• charging via USB Type-C port;
• LED: Luminus SFT70 with a service life of 50,000 hours;
• six brightness modes;
• body temperature control;
• charge level indication;
• low voltage notification function;
• Lantern dimensions: 152*34*25.4 millimeters;
• weight is 204 grams (taking into account the weight of the battery);
• the body is made of a6061-T6 aluminum;
• premium anodization;
• impact resistance - one meter;
• dust and moisture resistance standard: IP68.

Package

Fenix ​​TK20R V2.0 flashlight, ARB-L21-5000 V2.0 battery, USB Type-C charging cable, lanyard, case, two spare sealing rings, user manual, warranty card.

Official warranty

The warranty for this lantern is five years from the date of purchase.