Description of Fenix ​​UC35 V2.0 XP-L HI V3 lights:

Compact, light and at the same time powerful — this is the Fenix ​​UC35 V2.0. Thanks to the installation of modern components, this model has not only excellent brightness, but also fairly low energy consumption, due to which it is able to work longer than analogues from other manufacturers.

This lantern is equipped with a Cree XP-L HI V3 LED, which is capable of operating with a brightness of up to 1,000 lumens, while providing a directional light stream with a range of up to 266 meters.

Thanks to the built-in digital voltage stabilizer, the output light beam will not fade or flicker when the battery gradually discharges.

Another advantage of this model is the presence of a well-thought-out cooling system and a built-in temperature controller. The "last" one, in automatic mode, constantly monitors the temperature of the lamp and when it reaches 60°C, it reduces the maximum power level until it cools down.

6 operating modes are available to the user, which can be switched in turn using a button located near the "main" part made of stainless steel. Due to the presence of the "memory" function, when the flashlight is turned on, the last selected operating mode will be "launched". The charge level indicator (a pair of green and red LEDs) is built into the same button.

With the help of a rubberized end button, quick access to such modes of operation as "Stroboscope" and "Turbo" is provided. If necessary, you can install branded accessories, for example, a remote button and a weapon mount, thanks to which the Fenix ​​UC35 V2.0 model can be used both as a hand-held flashlight and as a flashlight.

The Fenix ​​UC35 V2.0 model comes with the brand Fenix ​​ARB-L18 Li-ion battery. However, if necessary, you can also use 18650 lithium-ion batteries with a voltage of 3.6-3.7 V from other manufacturers, a pair of CR123A lithium batteries or two LiFePO4 batteries with a voltage of 3.2 V made in the size 16340 (Fenix ​​UC35 V2.0 is not capable of charging this type of batteries) to power the lantern.

For the manufacture of the case of the Fenix ​​UC35 V2.0 model, high-quality aluminum alloy is used, the surface of which was anodized according to the HA III standard. This, combined with the excellent assembly and thoughtfulness of the design, allow this lantern to withstand a fall from a height of up to 1 meter, immersion and operation under water, as well as retain its original appearance for a long time. By the way, the level of dust and moisture protection of Fenix ​​UC35 V2.0 lights fully meets the international IP68 standard.

Features:

• the flashlight is equipped with a Cree XP-L HI V3 LED;
• the life of the LED is 50,000 hours;
• the lens is made of tempered mineral glass and has a special anti-reflective coating;
• the brightness level is up to 1,000 lumens;
• the intensity of the luminous flux is up to 17,000 cd;
• the maximum lighting distance is 266 meters;
• the Fenix ​​UC35 V2.0 model has a built-in digital current stabilizer;
• there is protection against overheating;
• the Fenix ​​UC35 V2.0 flashlight has 6 modes of operation;
• control elements - 2 keys (near the "main" and in the end part of the case);
• there is a function "memory";
• the lantern can be powered by one 18650 lithium-ion battery, a pair of CR123A lithium batteries or two 16340 LiFePO4 batteries;
• there is reverse polarity protection;
• there is a charge level indicator (mounted in a metal key located near "main" part);
• the installed battery can be charged through the built-in micro-USB port;
• the case is made of aviation aluminum alloy;
• the surface of the case is anodized according to the HA III standard;
• a special knurling is applied to the surface of the case, which prevents the flashlight from slipping out of the palm;
• the Fenix ​​UC35 V2.0 flashlight can withstand a 1-meter height and a drop long-term immersion, as well as operation, in water at a depth of up to two meters (IP68);
• the weight of the lantern without batteries is 89 grams.

Warranty: 5 years.