Used for cleaning the barrel from copper deposits, powder fouling, and partially dissolves brass and lead residues. The dense foam consistency allows it to reliably and long-lastingly adhere to the surface without damaging the barrel bore.

Application:

1. Shake the can.
2. Insert the nozzle from the chamber end and press the valve until foam exits the muzzle, while tilting the barrel downwards. Remove excess foam. Do not allow foam to enter the bolt mechanisms or trigger group.
3. Plug the barrel with a patch from both ends and leave horizontally for 20-30 minutes.
4. Clean the barrel by pushing several dry patches through.
5. For heavy fouling, repeat the process, leaving it for up to 60 minutes. The result of the reaction to copper residues is the appearance of a bluish or blue coloration on the foam and patch.
6. Neutralize foam residues with Recoil cleaner-degreaser and lubricate the barrel with Recoil synthetic gun oil.